A welding shoe guides molten plastic and helps shape the weld during extrusion welding. To choose the right shoe, match its contact profile to the joint geometry and welding position, then check its dimensions, mounting arrangement and available working space.
Our welding shoes are made from polytetrafluoroethylene (PTFE) and are available in four angle options: 180°, 90°, −90° and 60°. This guide explains how to select a suitable profile, outlines the properties of PTFE, and covers dimensions, machine compatibility, maintenance and replacement to help you choose the right shoe for your application.

What Does an Extrusion Welding Shoe Do?
The welding shoe guides molten plastic from the extrusion outlet onto the joint and helps shape the weld as the operator moves the tool. Its working surface contacts the workpiece, so the profile needs to suit the surfaces being joined.
The PTFE shaping component is only one part of the setup. A holder secures it to the machine, while a separate preheating nozzle directs hot air onto the welding surfaces ahead of the deposited material.
These parts need to work together. A shoe with the correct joint profile can still be unsuitable if its mounting points do not match the holder or its position obstructs the preheating nozzle.
Choosing the Angle and Contact Profile
The angle label is a starting point, not a complete specification. Look at the joint from the side where welding will take place, and compare it with the shoe’s working surface.
The four options below describe this product range. Other suppliers may use different names or profile designations.
| Shoe option | Where to start | Detail that can change the selection |
|---|---|---|
| 180° | A flat contact arrangement | An overlap can leave a step that the shoe must accommodate |
| 90° | A right-angle joint | The actual profile must suit the inside or outside of the corner |
| −90° | A right-angle joint with a different profile orientation | Confirm its designation against the product drawing rather than assuming it is interchangeable with 90° |
| 60° | Welding on inclined surfaces | Check contact with the slope, tool orientation and clearance for the preheating nozzle |

180° Shoes: Check the Overlap, Not Just the Flat Area
A 180° shoe has a flat contact configuration, but a flat work area does not always mean a flat joint. Two overlapping sheets create a change in level at the edge of the upper sheet.
When comparing shoes for this work, look at how the contact surface sits across that step. A profile that rocks or leaves an unintended gap may be difficult to guide and may not contain the molten plastic as required.
Patch repairs need another check: the route around the patch. A shoe that follows a straight edge may not maintain the same contact around a tight turn. Consider the edge geometry along the whole perimeter before choosing one profile for the repair.
90° and −90° Shoes: Distinguish Inside and Outside Corners
An inside corner is recessed, such as the connection between a tank base and its sidewall. An outside corner projects outward, such as the external edge where two box panels meet. Both may form a right angle, but they require different contact shapes.
| Feature | Inside-corner profile | Outside-corner profile |
|---|---|---|
| Working position | Reaches into a recessed corner | Fits around a projecting edge |
| Contact arrangement | Fits against the two adjoining surfaces inside the corner | Uses a concave working surface around the external corner |
| Typical work | Tank base-to-wall joints, internal box corners and fillet welds at T-joints | External box corners, housing edges and projecting panel corners |
| Main access concern | Room for the tool and hot-air nozzle inside the recess | Stable contact around the edge as the tool travels |
For a tank base-to-wall joint, the shoe needs to reach the internal connection while leaving room to preheat both surfaces. For an external box corner, the working profile needs to fit around the edge without rocking.
Do not assign an inside- or outside-corner application from the positive or negative angle label alone. Confirm which profile corresponds to each option in the supplier’s drawing. Rotating the installation does not necessarily turn one contact shape into the other, and it can also change the position of the material passage and preheating nozzle.
60° Shoes: For Welding on Inclined Surfaces
The 60° welding shoe is designed for welding on inclined surfaces. Its working profile helps the shoe contact the sloping surface in a suitable operating position, guide molten plastic and support weld formation.
When selecting this shoe, check its fit against the actual slope and whether it can maintain stable contact along the welding path. Also confirm sufficient clearance for the machine body, handle and preheating nozzle so surrounding structures do not force the tool away from its intended position.
Why PTFE Is Used for Welding Shoes
Our welding shoe shaping components are made from polytetrafluoroethylene, usually called PTFE. The metal holder is a separate supporting part.
PTFE has low adhesion, which helps reduce molten plastic sticking to the shoe. Its low-friction surface also helps the shoe move along the workpiece. It can be machined to form the contact profile and the internal passage that guides the material.
These properties do not make the shoe maintenance-free. Residue can accumulate, and scratches or chipped edges can alter contact with the workpiece. A damaged shaping surface may affect the weld profile even when material still passes through the shoe.

Dimensions to Check Before Ordering
Angle selection narrows the choice, but dimensions determine whether the shoe can do the required work. When measuring a replacement, distinguish the PTFE component from the complete assembly and use the same reference points as the supplier’s drawing.
| Dimension or feature | What to compare |
|---|---|
| Overall length, width and height | Space around the joint and clearance for the assembled tool |
| Working profile | Overlap steps, corner shape and any local curvature |
| Material passage | Its position relative to the extrusion outlet and suitability for the required weld profile |
| Mounting holes and locating surfaces | Hole positions, fastening arrangement and fit with the holder |
| Preheating clearance | Space for the nozzle to direct air onto the welding surfaces |

Shoe Width Is Not Finished Weld Width
The overall width of the PTFE part is not the same as the effective width of the finished weld. The shaping geometry and welding conditions also matter, including preheating, extrusion output, travel speed and technique.
If a drawing specifies a weld dimension, provide that requirement to the supplier. Ordering a shoe with the same overall width does not establish that it will produce the required weld.
A wider shoe may also reduce access near a wall or pipe. Choose dimensions that suit the joint and the available space rather than treating extra width as an advantage by itself.
Thickness Does Not Determine the Angle
Sheet thickness affects the welding requirements, but it does not tell you whether the joint needs a flat, inside-corner or outside-corner profile.
Identify the contact shape first. Then use the material thickness and required weld geometry to confirm the shoe dimensions and equipment configuration. Two jobs using the same sheet thickness can require different shoes because their joints are different.
Confirming Machine and Holder Compatibility
A shoe that slips over an extrusion outlet is not necessarily a compatible replacement. It must fasten securely, align with the material outlet and leave the preheating system in a suitable position.
Check the two connections separately: the PTFE component to the holder, and the holder to the machine. This helps avoid buying the correct-looking insert for a different mounting arrangement.
Before ordering, identify whether you need:
The PTFE component only, to fit an existing serviceable holder.
A complete shoe assembly, with the holder and any specified mounting parts.
Ask what the quoted assembly includes. Fasteners and other mounting parts should not be assumed to be included simply because a holder appears in a product photo.
Provide the exact machine model and photographs of the mounting area. If the machine or holder has changed between versions, a model name alone may not identify the correct replacement. Before ordering, confirm that the welding shoe’s specifications match your extrusion welder’s mounting arrangement.
If an existing holder is loose, deformed or has damaged fastening points, replacing only the PTFE component will not resolve that fault.

Check Access Along the Complete Welding Path
The starting position can be misleading. A shoe may sit correctly at the beginning of a seam but become obstructed by a nearby flange, wall or pipe as the tool moves.
Assess clearance for the machine body, handle, holder and preheating nozzle as well as the shoe. A smaller PTFE part will not help if the handle is what hits the surrounding structure.
On a pipe penetration, local curvature also matters. A profile that contacts one part of the joint may leave a gap elsewhere around the pipe. Provide the pipe diameter and photographs showing the surrounding space when requesting a recommendation.
For tight corners and curved repairs, explain where the obstruction occurs. An overall jobsite photo plus a close view of the joint is more useful than a close-up that hides the surrounding structure.
Cleaning, Inspection and Replacement
Inspect the shoe when cleaning it and when a change in contact or weld shaping appears. Remove residue using the specified procedure before deciding whether the PTFE itself is worn.
| Condition | What to look for | Action |
|---|---|---|
| Material residue | Deposits in the passage or on the shaping surface | Clean according to the equipment instructions, then inspect again |
| Surface scratches | Damage where the shoe contacts the workpiece or shapes the weld | Assess whether it changes contact, marks the workpiece or affects shaping |
| Chipped edges | Missing material that changes the intended profile | Evaluate replacement if the damage affects material control |
| Worn contact profile | A changed fit against the joint | Compare with the original profile or an undamaged replacement |
| Worn mounting points | Movement that remains despite correct installation | Repair or replace the affected component |
| Loose or deformed holder | Unstable shoe position | Correct the holder or fastening fault before use |
There is no universal replacement interval. Operating hours alone do not show whether the profile still fits the joint or the mounting remains secure.
Avoid trimming a shoe simply to squeeze it into a restricted space. Removing material can change its shaping surface, internal passage or fastening strength. Where a standard profile does not fit, discuss a suitable alternative or a purpose-machined component with the supplier.
After fitting a replacement or changing profiles, recheck fastening, passage alignment and preheating nozzle position. Carry out trial welding and the inspection required by the project procedure before production work. A smooth-looking surface alone does not establish weld acceptance.
Information to Send with a Welding Shoe Enquiry
A useful enquiry shows both the machine connection and the joint. This lets the supplier assess the part you need without relying on an angle label or a single product photograph.
| Information | What to provide |
|---|---|
| Machine identification | Brand, exact model and relevant version information |
| Existing shoe | Photos from several sides, plus any part number or drawing |
| Mounting arrangement | Holder photos, dimensions and fastening positions |
| Joint | A drawing or clear photo showing angle, orientation and overlap steps |
| Workpiece | Plastic material and thickness |
| Weld requirement | Required weld geometry and relevant procedure details |
| Working space | Wider photos showing nearby walls, flanges, pipes or other obstructions |
| Supply requirement | PTFE component or complete assembly, quantity and delivery destination |
Compare quotations for the same profile and scope of supply. A PTFE insert and a complete assembly are different purchases, even if both are described as a “welding shoe.” For a custom part, agree on the drawing and mounting details before manufacture.
If the correct profile is unclear, send the joint and mounting photos together. They give the supplier a much stronger basis for a recommendation than choosing the nearest-looking angle from a catalogue.
Häufig gestellte Fragen
Can One Welding Shoe Be Used for Every Joint?
No. A shoe may suit several jobs with similar geometry, but flat overlaps, recessed corners, projecting edges and curved joints can require different contact profiles.
Can I Choose a Replacement from a Photo Alone?
A photo can help identify the general shape, but it does not establish mounting dimensions or passage alignment. Include measurements, the machine model and any available part number.
Does a Shoe That Fits the Holder Fit the Job?
Not necessarily. Mechanical fit confirms only part of the selection. The working profile and tool clearance must also suit the joint.
Should I Replace the Metal Holder Every Time I Replace the PTFE Part?
Not automatically. A compatible, undamaged holder may remain usable. Inspect its locating surfaces and fastening points, and confirm that the replacement PTFE component is intended for it.
Can a Worn Shoe Keep Working if Plastic Still Flows Through It?
Continued flow does not prove that the shaping surface is serviceable. Wear may change contact with the joint or material control without blocking the passage.
What if None of the Standard Profiles Fits?
Provide a joint drawing, mounting details and working-space photos. The supplier can assess whether another standard profile or a custom component is appropriate. Do not assume that cutting down an existing shoe will preserve its function.
Fazit
The right welding shoe should prove suitable in actual use. From installation through trial welding, confirm that it maintains stable contact with the workpiece, moves smoothly along the welding path and meets the specified weld requirements.
Need help choosing a welding shoe? Send Bortte photos of your joint and existing shoe, along with your welder model and material thickness. We can help you check the profile and mounting requirements before ordering.
